Corner Glass Fixing 90°

90° Corner Glass Fixing Ø40 mm is designed for connecting and fixing two glass panels at a 90° angle. The construction uses Ø40 mm round point-fixing elements, providing a compact and aesthetically clean connection between two glass panels.

The holder is manufactured from AISI 304 stainless steel with a brushed surface finish. Protective gaskets are positioned between the glass and the metal components to prevent direct contact between the glass and stainless steel. Ø22 mm holes are required in the glass for installation.

Technical Information:

• Type: 90° corner glass fixing
• Material: AISI 304 stainless steel
• Surface finish: brushed
• Glass thickness: 6–21 mm
• Glass hole: Ø22 mm
• Glass holder diameter: Ø40 mm
• Holder height: 60 mm
• Holder length: 52 mm
• Threaded rod: M10
• Angle: 90°

Features:

• Designed for connecting two glass panels at a 90° angle.
• Point-fixed glass connection through Ø22 mm holes in the glass.
• Ø40 mm round glass clamping elements.
• Protective gaskets separate the glass from the metal components.
• Manufactured from AISI 304 stainless steel.
• Brushed stainless steel surface finish.
• Compact construction for connecting glass panels at corners.

Applications:

The 90° corner glass fixing can be used in glass structures where two glass panels need to be connected at a right angle. It is suitable for glass partitions, protective glass structures and other applications requiring a 90° glass-to-glass connection.

The point-fixed construction helps maintain a minimalist appearance of the glass system, while the brushed stainless steel components provide a clean and modern finish.

Installation:

Ø22 mm holes must be prepared in both glass panels. The glass panels are positioned between the Ø40 mm clamping elements and the holder using protective gaskets, which prevent direct contact between the glass and the metal components.

The holder connects the two glass panels at a 90° angle. During installation, the glass panels should be correctly aligned and the fixing elements tightened evenly.

• Glass Holders
• Glass Adaptors
• Glass Clamps
• Glass Clamps and Connectors
• Glass Clamp Installation and Applications

Frequently Asked Questions:

What is this corner glass fixing used for?
The holder is designed for connecting and fixing two glass panels at a 90° angle.

What glass thickness is the holder suitable for?
The holder is suitable for glass with a thickness of 6–21 mm.

What size holes are required in the glass?
A Ø22 mm hole is required at the fixing point of each glass panel.

What is the diameter of the glass clamping elements?
Both round glass clamping elements have a diameter of Ø40 mm.

Are gaskets used between the glass and stainless steel?
Yes. Protective gaskets separate the glass from the metal components and prevent direct contact between the glass and stainless steel.