Handrail set D42/1500 mm

Stair Railing Set D42/1500 mm, AISI 304 is a complete stainless steel railing kit designed for straight staircase sections in residential and commercial buildings. The set consists of two railing posts, a round handrail and four horizontal infill tubes. Adjustable handrail and horizontal infill holders allow the railing angle to be adapted to the actual staircase slope.

This stair railing set is manufactured from AISI 304 stainless steel and has a satin finish. The 1500 mm kit is a practical solution for shorter staircase sections, with the main system components designed to work together. If the standard solution does not meet your requirements, we can manufacture custom-sized stainless steel railings.

Technical Specifications

• Railing length – 1500 mm.
• Railing height – 1000 mm.
• Handrail – Ø42.4 × 2 mm.
• Horizontal infill tubes – Ø12 × 1.5 mm.
• Horizontal infill lines – 4 pcs.
• Number of railing posts – 2 pcs.
• Material – AISI 304 stainless steel.
• Finish – satin.

Why Choose This Stair Railing Set?

This 1500 mm railing kit is designed for shorter straight staircase sections where a compact and modern railing system is required. Adjustable holders allow the handrail and horizontal infill angle to be aligned with the staircase slope, making it easier to adapt the system to the actual installation conditions.

• Complete kit for a 1500 mm staircase section.
• Two-post construction.
• Adjustable handrail holders.
• Adjustable horizontal infill holders.
• Four horizontal infill lines.
• Manufactured from AISI 304 stainless steel.
• The handrail and infill tubes can be adjusted to the required dimensions.
• Modern and easy-to-maintain satin finish.

Kit Includes:

The handrail set includes:

• 2 stainless steel railing posts;
• 1 handrail, Ø42.4 × 2 mm;
• 4 horizontal infill tubes, Ø12 × 1.5 mm;
• adjustable handrail holders;
• adjustable horizontal infill holders;
• handrail end caps;
• horizontal infill end caps;
• adhesive for stainless steel components;
• a drill bit and rivets required for assembly.

The kit components are supplied separately. The handrail and horizontal infill tubes can be shortened during installation to match the actual staircase dimensions, while the adjustable holders allow their angle to be aligned with the staircase slope.

Fixings for securing the railing to the staircase structure are not included, as they must be selected individually according to the base material, supporting structure and expected loads.

Installation

The stair railing set is supplied unassembled. First, mark the positions of the two railing posts and secure them to a properly prepared staircase structure. Once the posts have been installed and aligned, adjust the handrail holders to match the staircase slope and install the handrail.

The horizontal infill tubes are installed into their adjustable holders, with the holder angle aligned to the staircase slope. Before permanently securing all components, check that the posts are vertical, the spacing is consistent and the complete railing system is correctly aligned.

Installation Videos

The installation video demonstrates the main stages of assembling a stair railing system, including post fixing, handrail installation, fitting the horizontal tubes and adjusting the holder angles to match the staircase slope.

Fixing Elements

Fixings for concrete, timber, steel or another staircase structure must be selected separately. Their type, diameter and length depend on the base material, structural condition and expected loads. Suitable products are available in our railing fittings category.

Custom Railing Solutions

If the standard 1500 mm stair railing set does not meet your project requirements, we can manufacture custom-sized stainless steel railings according to supplied drawings or site dimensions. The railing length, number of posts, staircase angle, horizontal infill arrangement and other system components can be adapted to your project.

Related Categories

• Stair Railing Systems
• Stainless Steel Railing Systems
• Railing Fittings

Frequently Asked Questions:

Can the railing angle be adjusted to match the staircase slope?

Yes. The handrail and horizontal infill holders are adjustable, allowing their angle to be adapted to the actual staircase slope.

Can the handrail and horizontal tubes be shortened?

Yes. The handrail and horizontal infill tubes can be shortened during installation to match the actual staircase dimensions. The cut surfaces should be properly cleaned and treated after cutting.

Can I order a stair railing in custom dimensions?

Yes. We manufacture stainless steel railings according to individual dimensions, drawings or project requirements. The railing length, configuration and other system elements can be adapted to your needs.