Concrete Fixing Set M8×80 ZN (2 pcs)

Concrete Fixing Set M8×80 ZN (2 pcs) is a set of two zinc-plated steel wedge anchors designed for fastening metal brackets, railing components and structural elements to concrete substrates. The M8×80 mm anchors feature a mechanical expansion mechanism that engages with the concrete when the nuts are tightened, creating a secure mechanical connection.

This concrete fixing set is particularly suitable for installing metal brackets, supports and other components with two mounting holes. The package contains two wedge anchors, each supplied with a nut and washer, providing a convenient fixing solution without purchasing individual fasteners separately. The cold zinc-plated finish (ZN) provides basic corrosion protection, making this set suitable for dry indoor environments only.

Technical Information

• Product Code: INK0880-2
• Set Type: Concrete fixing set
• Fastener Type: Wedge anchors
• Quantity: 2 pcs
• Thread Diameter: M8
• Anchor Length: 80 mm
• Drill Hole Diameter: Ø8 mm
• Material: Steel
• Finish: Cold zinc-plated (ZN)
• Base Material: Concrete
• Suitable Environment: Dry indoor areas
• Included: 2 wedge anchors M8×80 mm, 2 nuts and 2 washers

Applications

• Installing metal brackets with two mounting holes onto concrete substrates.
• Fixing railing components and mounting accessories in dry indoor environments.
• Securing metal supports, brackets and mounting plates to concrete.
• Installing structural components requiring two anchor fixing points.
• General indoor construction and installation projects.

Key Features

• Set of 2 zinc-plated steel wedge anchors M8×80 mm.
• Cold zinc-plated finish provides basic corrosion protection in dry indoor conditions.
• Mechanical wedge expansion anchoring mechanism.
• Reliable fastening into suitable concrete substrates.
• Convenient fixing solution for metal components with two mounting holes.
• Each anchor is supplied complete with a nut and washer.

Installation

1. Mark the fixing positions. Position the metal bracket or mounting plate against the concrete surface and mark both mounting hole locations.

2. Drill the holes. Use a rotary hammer drill with a Ø8 mm concrete drill bit to drill two holes at the marked positions. The drilling depth must comply with the anchor manufacturer's installation requirements. Thoroughly remove drilling dust and debris from the holes.

3. Insert the anchors. Insert the two M8×80 mm wedge anchors into the drilled holes and carefully tap them into position using a steel-headed hammer. Keep the nuts threaded onto the anchors during tapping to help protect the threads.

4. Secure the component. Position the mounting plate over the anchors, install the washers and nuts, and tighten them using a suitable wrench. Apply the tightening torque specified by the anchor manufacturer. Tightening activates the expansion mechanism, securing the anchors inside the concrete.

Important: This fixing set is intended for installation into suitable concrete substrates in dry indoor environments only. Before installation, verify the concrete condition, expected loads, minimum edge distances, anchor spacing and the manufacturer's installation requirements. The cold zinc-plated finish is not intended for prolonged exposure to outdoor or damp conditions. For such applications, select fasteners with an appropriate corrosion resistance rating.

Related Products

• Fixing Elements – a selection of fasteners and mounting accessories for various applications.
• Concrete Anchoring – wedge anchors and other fastening solutions for concrete substrates.
• Fixing into Wood – wood screws and fastening elements designed for timber structures.
• Railing Posts – stainless steel posts for railing systems.

Frequently Asked Questions

What is included in the M8×80 ZN concrete fixing set (2 pcs)?
The set contains 2 zinc-plated steel wedge anchors M8×80 mm, 2 nuts and 2 washers.

What applications is the two-anchor fixing set suitable for?
This set is suitable for metal brackets, railing components and other structures requiring two anchor fixing points in dry indoor environments. The selected fixing arrangement must meet the structural load requirements and manufacturer's installation specifications.

What drill hole diameter is required?
The M8×80 mm wedge anchors require two Ø8 mm holes in concrete. The drilling depth must follow the manufacturer's installation specifications.

Can this zinc-plated concrete fixing set be used outdoors?
No. These cold zinc-plated anchors are recommended for dry indoor environments only. For outdoor or damp conditions, choose anchors with suitable corrosion resistance.

Can this fixing set be used for timber structures?
No. These wedge anchors are designed for concrete substrates. For timber structures, choose suitable fasteners from our Fixing into Wood category.