End Balcony Glass Railing Post H-1060 mm (Left) (AISI-316 grade)

STA-1012-AISI316 Balcony End Glass Railing Post (Left-Hand) – a 1060 mm high left-hand AISI 316 stainless steel end post designed for glass railing systems with a Ø42.4 mm handrail and an overall railing height of approximately 1100 mm, offering enhanced corrosion resistance for outdoor applications.

Technical Information

• Product code: STA-1012-AISI316
• Type: Balcony End Glass Railing Post (Left-Hand)
• Post height: 1060 mm
• Overall railing height with handrail: approx. 1100 mm
• Post tube diameter: Ø42.4 mm
• Handrail tube diameter: Ø42.4 mm
• Material: AISI 316 stainless steel
• Surface finish: Brushed satin
• Glass clamps: 2 pcs, on one side of the post, included
• Glass clamp gaskets: included, selected according to glass thickness
• Glass thickness: 6 / 8 / 8.76 / 10 / 10.76 mm
• Top handrail connector: Adjustable
• Mounting: Top mounted, using a round base flange
• Weight: 3.45 kg

Applications

• Glass balcony and terrace railing systems.
• Stair landings and other horizontal railing sections.
• Glass railing systems with an overall height of approximately 1100 mm.
• Left-hand end sections of glass railing structures.
• Residential and commercial building railings.
• Outdoor railings, including more corrosive environments, where the structure meets the applicable height, load and environmental requirements.

Features

• AISI 316 stainless steel construction with enhanced corrosion resistance compared with AISI 304.
• 1060 mm high post manufactured from Ø42.4 mm tubing.
• Modern brushed satin surface finish.
• Left-hand end configuration with glass clamps on one side.
• Two pre-installed glass clamps.
• Glass clamp gaskets are included and selected according to the specified glass thickness.
• Adjustable top connector for a Ø42.4 mm handrail.
• Creates an overall railing height of approximately 1100 mm when combined with a handrail.
• Floor mounting using a round base flange.
• INOXAS can modify post dimensions and glass clamp positions according to individual project requirements.

Installation

The post is mounted from above onto a suitable load-bearing surface using the round base flange. This left-hand end model is installed at the beginning or end of a glass railing section according to the position of the glass panel. The adjustable top connector is designed to support a Ø42.4 mm handrail and allows its angle to be adjusted.

The post is supplied with two pre-installed glass clamps on one side. When ordering, select the required glass thickness: 6 mm, 8 mm, 8.76 mm (laminated 4+4), 10 mm or 10.76 mm (laminated 5+5). The appropriate glass clamp gaskets will be included according to your selection.

For detailed mounting instructions, see our guide How to Install Railing Posts.

Installation examples are available on our Railing Installation Videos page.

Mounting Accessories

Glass clamps and gaskets selected according to glass thickness are included with the railing post. The handrail tube and fasteners for securing the post to the supporting surface are selected separately according to the mounting substrate, expected loads and environmental conditions. For outdoor applications, corrosion-resistant fasteners suitable for the installation environment are recommended. Additional fixing components are available in our Mounting Accessories category.

Related Products

• Glass Railing Posts with Tube – other round stainless steel railing post models for glass infill.
• Glass Clamps – glass fixing components and accessories.
• Handrails & Handrail Tubes – Ø42.4 mm handrails and other railing tubes.
• Elbows and Connectors – components for connecting handrails and tubes.
• Railing Posts – other stainless steel posts for railing systems.

Frequently Asked Questions

What is the overall railing height when using this post?
The 1060 mm post, combined with a Ø42.4 mm handrail tube, creates an overall railing height of approximately 1100 mm.

What is the difference between left-hand and right-hand end posts?
These models differ in the position of the glass clamps. The left-hand STA-1012-AISI316 model is selected according to the position of the glass panel within the railing structure.

Are glass clamps and gaskets included?
Yes. The post is supplied with two glass clamps. When you select the glass thickness during ordering, the appropriate gaskets will be included.

Can I order a custom-sized railing post?
Yes. INOXAS can manufacture railing posts according to individual project requirements, including modified heights and glass clamp positions.

Need a custom solution? If standard railing components do not meet your project requirements, contact us – we can discuss custom manufacturing options.