French Railing Bracket 50x60mm

French balcony glass holder 50 × 60 mm with anchoring rod PRT-2206-08 – a stainless steel glass fixing set designed for French balconies, protective glass railings and other façade-mounted glass structures. The rectangular holder securely retains the glass panel, while the long anchoring rod allows the system to be installed through building façades of different thicknesses.

The holder and anchoring rod are manufactured from AISI 304 stainless steel, providing mechanical strength, corrosion resistance and long service life. The satin finish creates a clean architectural appearance, while this PRT-2206-08 version is configured for 8 mm thick glass.

Technical Data

• Product code – PRT-2206-08.
• Glass holder dimensions – 50 × 60 mm.
• Selected glass thickness – 8 mm.
• Available versions for glass thicknesses – from 8 to 10 mm.
• Anchoring rod dimensions – Ø16 × 320 mm.
• Maximum façade thickness – up to 220 mm.
• Holder connection to the rod – DIN 912 M8×20 mm screw.
• One end of the rod – M8×25 mm internal thread.
• Other end of the rod – grooved for installation with a chemical anchor.
• Material – AISI 304 stainless steel.
• Finish – satin.

Why choose the PRT-2206-08 glass holder?

The PRT-2206-08 is a reliable solution for French balcony installations where the fixing element must be anchored through a façade or another structural base. The grooved section of the rod provides strong adhesion with the chemical anchor, while the threaded connection allows the glass holder to be installed accurately and securely.

• This version is configured for 8 mm thick glass.
• Alternative holder versions are available for 8–10 mm glass.
• Strong 50 × 60 mm glass holder.
• Ø16 mm anchoring rod.
• Suitable for façades up to 220 mm thick.
• Rod length can be adjusted to the actual façade thickness.
• Satin finish matches other stainless steel railing components.

Set Contents

One PRT-2206-08 set includes the main components required for installing the glass structure:

• 50 × 60 mm stainless steel glass holder;
• protective gaskets suitable for 8 mm glass;
• Ø16 × 320 mm anchoring rod;
• threaded components required to connect the holder.

The chemical anchor and structural fixing accessories are not included, because their specification depends on the wall, façade and supporting material.

Applications

• French balcony glass systems.
• Protective glass structures installed in front of windows.
• Glass railing installation on building façades.
• Glass panel fixing to concrete, masonry or another suitable supporting base.
• Residential, commercial and public building projects.

Installation

The grooved section of the Ø16 × 320 mm rod is bonded into the structural base using a suitable chemical anchor. The anchoring depth and rod length are adjusted according to the actual façade thickness. After installation, the threaded end of the rod should be level with the façade surface.

A spacer component is attached to the threaded end of the rod, while the 50 × 60 mm glass holder is secured using a DIN 912 M8×20 mm screw. The glass panel must be installed with protective gaskets suitable for its thickness. Tighten all screws evenly without exceeding the permissible clamping pressure for the glass.

Installation Videos

Practical examples of French balcony, stainless steel railing and glass structure installation are available on our installation video page. The videos demonstrate installation principles, working procedures and useful technical recommendations.

Fixing Elements

The chemical anchor and other structural fixing elements are not included. Suitable fixing elements must be selected according to the concrete, masonry, wall or other supporting material, its condition and the expected loads of the glass structure.

Related Categories

• French balconies with glass holders
• French balcony systems
• Fixing elements

Frequently Asked Questions

What glass thickness is the PRT-2206-08 holder designed for?

This PRT-2206-08 version is configured for 8 mm thick glass. Alternative holder versions are also available for glass panels up to 10 mm thick.

What façade thickness is suitable for the anchoring rod?

The Ø16 × 320 mm rod is suitable for façades up to 220 mm thick. Its length can be adjusted according to the actual project dimensions.

How is the anchoring rod fixed into the wall?

The grooved section of the rod is bonded into the wall or another structural base using a chemical anchor. The anchor type and installation depth must be selected according to the supporting material and calculated loads.

Are protective glass gaskets included?

Yes. This set includes protective gaskets suitable for 8 mm thick glass.

Is the chemical anchor included?

No. The chemical anchor must be selected separately according to the installation base, façade structure and expected design loads.